跳转到主内容

修复你的物品

维修的权力

商店

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 2

步骤 2
Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. Insert a plastic card under the lower battery cell, at the lower right-hand corner. If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.
  • Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Insert a plastic card under the lower battery cell, at the lower right-hand corner.

  • If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

在以下步骤中,您将在iPad的电池和后壳之间滑动塑料卡,以分离固定电池的粘合剂。 小心保持卡尽可能平坦,以避免电池弯曲,这可能会损坏电池并使其释放危险的化学物质。

在右下角的下面的电池下方插入塑料卡。

如果遇到显着的阻力,请重新加热iOpener并重复上一步,使粘合剂有更多的时间变软。

在开源创作共享许可协议下,你的投稿已被许可