跳转到主内容
英语
荷兰语

正翻译步骤 3

步骤 3
After removing the screw you can gently pry or pull the old knob off. Now would be a good time to clean out the crevices on the radio where the old knob sat. You will now want to get your newly printed knob. Use the .stl file at the bottom of the page to either print your own or have it printed and shipped to you. I printed this one in ABS but it would probably be even better in PLA. I printed this one with the top on the print bed. (upside down)
Out with the old. In with the new.
  • After removing the screw you can gently pry or pull the old knob off. Now would be a good time to clean out the crevices on the radio where the old knob sat.

  • You will now want to get your newly printed knob. Use the .stl file at the bottom of the page to either print your own or have it printed and shipped to you.

  • I printed this one in ABS but it would probably be even better in PLA. I printed this one with the top on the print bed. (upside down)

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可