跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Make sure connector is completely dry before soldering, failure to do so may result in permanent damage.
  • Make sure connector is completely dry before soldering, failure to do so may result in permanent damage.

  • If you have previously soldered inside the microphone, you may use a soldering iron to melt off any excess solder that may be on the pins inside the connector. Do not attempt this if you have never soldered on the microphone before.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可