跳转到主内容

修复你的物品

维修的权力

商店

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

步骤 1
Lift the back edge of the lower case assembly and prop it up at an angle using a book or foam block. In the following steps, you'll apply liquid adhesive remover along the edges of the battery cells. Keeping part of the MacBook elevated will help the adhesive remover flow underneath the battery. You can reorient the MacBook as needed throughout this procedure, but try to prevent the adhesive remover from touching any components other than the battery and metal chassis.
  • Lift the back edge of the lower case assembly and prop it up at an angle using a book or foam block.

  • In the following steps, you'll apply liquid adhesive remover along the edges of the battery cells. Keeping part of the MacBook elevated will help the adhesive remover flow underneath the battery.

  • You can reorient the MacBook as needed throughout this procedure, but try to prevent the adhesive remover from touching any components other than the battery and metal chassis.

  • If necessary, add a layer of aluminum foil underneath your MacBook to protect your workspace from wayward drops of adhesive remover.

抬起下壳组件的后边缘,并使用书本或泡沫块以一定角度将其支撑起来。

在以下步骤中,你将沿着电池的边缘涂抹液体粘合剂去除剂。保持MacBook的一部分升高将有助于粘合剂移除在电池下方的流动。

你可以在此过程中根据需要重新调整MacBook的方向,但请尽量避免粘合剂去除剂接触电池和金属机箱以外的任何组件。

如有必要,可在MacBook下方添加一层铝箔,以防止工作区掉落粘合剂。

在开源创作共享许可协议下,你的投稿已被许可