跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的74指南

英语
中文

正翻译步骤 1

步骤 1
Before starting this procedure, you must disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide or follow the abbreviated instructions below to disable Auto Boot. Power on your Mac and launch Terminal. Copy and paste the following command (or type it exactly) into Terminal:
Disable Auto Boot
  • Before starting this procedure, you must disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide or follow the abbreviated instructions below to disable Auto Boot.

  • Power on your Mac and launch Terminal.

  • Copy and paste the following command (or type it exactly) into Terminal:

  • sudo nvram AutoBoot=%00

  • Press [return]. If prompted, enter your administrator password and press [return] again. Note: Your return key may also be labeled ⏎ or "enter."

  • You can now safely power down your Mac and open the bottom case, without it accidentally powering on.

  • When your repair is complete and your Mac is successfully reassembled, re-enable Auto Boot with the following command:

  • sudo nvram AutoBoot=%03

在开始此步骤之前,你必须禁用 Mac 的「自动启动」功能。「自动启动」功能会让 MacBook 在掀开盖子时自动开机。这个功能在拆卸过程中也可能会被意外触发。使用本指南或按照下面的简要说明来禁用自动启动。

开机,并打开「终端」。

将以下命令复制粘贴到(或完全键入)终端窗口中:

sudo nvram AutoBoot=%00

按[回车]。如果出现钥匙提示,请输入管理员密码(开机密码)并再次按[回车]。注意:您的回车键也可能标有「⏎」或「return」。

你现在可以安全地关闭Mac电脑,并打开底壳,它不会再意外启动了。

当修理完成、成功组装复原Mac电脑后,在「终端」中使用以下命令来启用「自动启动」功能:

sudo nvram AutoBoot=%03

在开源创作共享许可协议下,你的投稿已被许可