跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 4

步骤 4
When your repair is complete and your Mac is successfully reassembled, you can re-enable the Auto Boot feature. Power on your Mac and launch Terminal. Copy and paste the following command (or type it exactly) into Terminal:
  • When your repair is complete and your Mac is successfully reassembled, you can re-enable the Auto Boot feature.

  • Power on your Mac and launch Terminal.

  • Copy and paste the following command (or type it exactly) into Terminal:

  • sudo nvram AutoBoot=%03

  • Press [return].

  • If you are prompted for an administrative password, type the password and press [return].

  • Your password will not be displayed in Terminal.

  • Alternatively, you may reset your Mac's NVRAM to re-enable Auto Boot.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可