跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Remove four T10 Torx screws securing the power supply to the rear case. The fine-thread screw belongs in the lower right corner of the power supply. When reinstalling the power supply, install the fine-threaded screw first.
  • Remove four T10 Torx screws securing the power supply to the rear case.

  • The fine-thread screw belongs in the lower right corner of the power supply. When reinstalling the power supply, install the fine-threaded screw first.

  • Lift the power supply out of the rear case, minding the AC-in cable that may get caught.

  • Do not touch the face of the power supply board to avoid electric shock.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可