Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 6

Step 6
Remove the single T10 Torx screw securing the right speaker to the logic board. Lift the right speaker out of the rear case and move it out of the way.
  • Remove the single T10 Torx screw securing the right speaker to the logic board.

  • Lift the right speaker out of the rear case and move it out of the way.

  • Both speakers are still attached to the logic board by the speaker cable.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可