跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 1

步骤 1
Place the hydraulic floor jack under the vehicle until the saddle is directly under the crossmember. The crossmember is the long metal support beam that runs underneath from the front fender to the rear fender on both sides of the car.
  • Place the hydraulic floor jack under the vehicle until the saddle is directly under the crossmember.

  • The crossmember is the long metal support beam that runs underneath from the front fender to the rear fender on both sides of the car.

  • The saddle is the round metal part of the jack that moves upward as you pump the jack up.

将液压卧式千斤顶的鞍座放置在车辆的横梁下方。

横梁是在车辆下的两根平行长金属梁,贯穿车辆的前挡泥板到后挡泥板的金属梁。

鞍座是千斤顶的圆形金属部分,当您抬升千斤顶时鞍座也向上抬升。

在开源创作共享许可协议下,你的投稿已被许可