跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Use the flat end of a spudger to pry the thermal sensor board off the adhesive securing it to the hard drive.
  • Use the flat end of a spudger to pry the thermal sensor board off the adhesive securing it to the hard drive.

  • If you're replacing your hard drive, transfer this sensor to the same position on the new drive.

  • Users have reported that without the sensor connected, the fans will run consistently at maximum speed.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可