跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Remove the two 12 mm shouldered T8 Torx screws holding the hard drive bracket to the connector side of the hard drive. After removing these two screws, the bracket will fall away from the hard drive.
  • Remove the two 12 mm shouldered T8 Torx screws holding the hard drive bracket to the connector side of the hard drive.

  • After removing these two screws, the bracket will fall away from the hard drive.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可