跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 2

步骤 2
Remove the front-facing camera and rear microphone assembly. If you are installing a new part, your new part may have two tabs with holes in it used for manufacturing purposes. These tabs can be cut off with scissors.
  • Remove the front-facing camera and rear microphone assembly.

  • If you are installing a new part, your new part may have two tabs with holes in it used for manufacturing purposes. These tabs can be cut off with scissors.

  • There is a small, square plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly.

  • If replacing the proximity sensor or camera make sure that the holder remains adhered to the back of the display. If it comes off with the old proximity sensor, remove it from the old sensor and use a tiny bit of adhesive to re-attach it to the back of the display.

取下前摄像头及后麦克风组件。

当你安装替换件时可能会发现,替换件上可能会带有方便手工组装的两块标签。这两块标签可以用剪刀去掉。

此处有一个小小的、方形的、由塑料和金属制成的固定装置。距离传感器的正常工作需要这个传感器。

当替换距离传感器或前摄像头时,确保此固定装置固定在显示面板组件的背面。如果它随旧的距离传感器一起脱离了,用一点点粘合剂把它黏回显示面板组件的背面。

在开源创作共享许可协议下,你的投稿已被许可