注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。
正翻译步骤 5
步骤 5
-
Remove the two 6mm T10 Torx screws from the side of the optical drive.
注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。
Remove the two 6mm T10 Torx screws from the side of the optical drive.
It's a good idea to lay your iMac flat on a table before removing these screws to avoid them falling behind the logic board.
下一行
上一行
在下面插入新的一行
在上面插入新的一行
缩进当前行
取消缩进当前行
删除当前行
导航到下一步。
导航到上一步。
打开帮助