跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 3

步骤 3
Use the flat end of a spudger to pry the optical drive ribbon cable connector up off the logic board.
  • Use the flat end of a spudger to pry the optical drive ribbon cable connector up off the logic board.

  • The connector is most easily removed when prying from the top or bottom of the connector.

  • Bend the optical drive ribbon cable back away from the logic board.

  • Be very careful when moving the optical drive ribbon cable as it is delicate and easily ripped.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可