跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Remove the seven 3mm screws that hold the cooling system down using a Phillips #1 screwdriver. Four are along the heat sink above the CPU, one is on the side of smaller heat sink to the left of the CPU heat sink. Two are along the edge of the fan.
  • Remove the seven 3mm screws that hold the cooling system down using a Phillips #1 screwdriver.

  • Four are along the heat sink above the CPU, one is on the side of smaller heat sink to the left of the CPU heat sink. Two are along the edge of the fan.

  • Remove the cooling system from the device.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可