跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 15

步骤 15
With the cover removed, go ahead and begin removing all the ribbon cables from the PCB. Remove the 2 pin connector as well. There is one more screw holding in the PCB. Remove the screw on the left hand side of the camera which holds the I/O cover to the PCB. The PCB should now be relatively lose inside the camera.
  • With the cover removed, go ahead and begin removing all the ribbon cables from the PCB. Remove the 2 pin connector as well.

  • There is one more screw holding in the PCB. Remove the screw on the left hand side of the camera which holds the I/O cover to the PCB.

  • The PCB should now be relatively lose inside the camera.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可