跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 4

步骤 4
Plug the included sensor-enabled SATA cable into the enclosure's port. Line up the narrow side of the cable connector with the narrow side of the enclosure connector. The cable is keyed to connect in only one way. If you can't connect the cable, rotate it 180°, and try again.
  • Plug the included sensor-enabled SATA cable into the enclosure's port.

  • Line up the narrow side of the cable connector with the narrow side of the enclosure connector. The cable is keyed to connect in only one way. If you can't connect the cable, rotate it 180°, and try again.

将随附的带有传感器功能的SATA电缆插入硬盘盒端口。

将电缆连接器的窄侧与外壳连接器的窄侧对齐。 连接器仅可以一种方式连接。 如果无法连接,请将其旋转180°,然后重试。

在开源创作共享许可协议下,你的投稿已被许可