跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 2

步骤 2
Line up the small SATA connector so that the short side on the SSD connector matches the short side on the enclosure connector. Slide the drive in through the front of the enclosure until the SATA connector is fully seated. The SSD connects with the enclosure in only one way. If the connectors are not lining up, rotate the SSD and try again.
  • Line up the small SATA connector so that the short side on the SSD connector matches the short side on the enclosure connector.

  • Slide the drive in through the front of the enclosure until the SATA connector is fully seated.

  • The SSD connects with the enclosure in only one way. If the connectors are not lining up, rotate the SSD and try again.

露出小型SATA针脚,让SSD针脚与硬盘盒连接器部分对齐。

将驱动器从硬盘盒前部滑入,直至SATA连接器完全就位。

SSD与硬盘盒仅有一种连接方式。 如果无法连接,旋转SSD再试一次。

在开源创作共享许可协议下,你的投稿已被许可