Removing iPad 3 4G Front Panel

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的153指南。

英语

韩语

正翻译步骤 20

步骤 20

Slide the opening pick along the left edge of the iPad, releasing the adhesive as you go. The adhesive is thin here due to the digitizer along the whole left side. Make sure the pick is not too deep (max 1/2 inch) 10 mm to prevent damaging the digitizer.
The digitizer cable is located approximately 2" (50 mm) from the bottom of the iPad. Stop sliding the pick when you get ~2.25" (60 mm) from the bottom of the iPad.