跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的153指南

英语
法语

正翻译步骤 16

步骤 16
Continue releasing the adhesive all the way along the bottom edge of the iPad. On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
  • Continue releasing the adhesive all the way along the bottom edge of the iPad.

  • On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.

  • Leave the opening pick wedged underneath the front glass near the home button.

Continuez à décoller l'adhésif tout le long du bord inférieur de l'iPad.

Si vous avez un iPad 4, insérez au maximum 1,2 cm du médiator dans cette zone pour éviter d'endommager la nappe du bouton home.

Laissez le médiator coincé sous la vitre frontale à côté du bouton home.

[* black] Continue releasing the adhesive all the way along the bottom edge of the iPad.
- [* icon_caution] On iPad 4 models, insert the pick to a maximum depth of 1/2 inch in this area, to avoid damaging the home button ribbon cable.
+ [* icon_caution] On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
[* black] Leave the opening pick wedged underneath the front glass near the home button.

在开源创作共享许可协议下,你的投稿已被许可