跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南

英语
中文

正翻译步骤 10

Step 10
Remove the following screws securing the logic board to the rear case:
  • Remove the following screws securing the logic board to the rear case:

  • Two 2.3 mm Phillips screws

  • Two 2.7 mm standoff screws

  • Standoff screws are best removed using an iPhone Standoff Screwdriver Bit and driver handle.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

  • One non-magnetic 2.7 mm standoff screw

  • Be sure to put this screw back in its original position at the top of the logic board. A magnetized screw may interfere with the digital compass.

松开把主板固定在后盖上的螺丝:

2颗2.3mm飞利浦螺丝

2颗2.7mm中板螺丝

你可以通过专用的压铆螺柱螺丝刀螺丝刀组更轻松地卸下它们。

简单说来,一个小的平头螺丝刀可以做到——但是需要额外的小心,来保证不损坏周围的部件。

1颗无帽2.7mm 压铆螺柱螺丝

确保把这颗螺丝拧在主板的顶部,带磁性的螺丝会影响数字罗盘。

在开源创作共享许可协议下,你的投稿已被许可