Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的22本指南

英语
中文

正翻译步骤 7

Step 7
Make sure the suction cup is firmly attached to the front panel assembly.
Start lifting the front panel assembly
  • Make sure the suction cup is firmly attached to the front panel assembly.

  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.

  • Take your time and apply firm, constant force. The screen is a much tighter fit than most devices.

  • With a plastic opening tool, begin to gently pry the rear case down, away from the screen, while you pull up with the suction cup.

  • There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

屏幕通过卡扣固定在机身,并且有几条带状电线连接着屏幕和机身。你的目标是打开手机到足够分离电线就可以了。所以在操作时你需要非常缓慢,谨慎地避免损坏电线。

确保吸盘紧紧地吸附在home键附近的前面板组件上

一只手固定好iPhone机身,另一只手轻轻地把机身从前面板底端的home键上分离。

当你左手使用吸盘拉动的时候,右手用塑料撬棒在后机壳边缘处,轻轻地撬动,使屏幕和机身分离。

慢慢来,使用恒力操作。5s的前面板组件比其它电子设备紧得多。

[title] Start lifting the front panel assembly
[* icon_note] Make sure the suction cup is firmly attached to the front panel assembly.
[* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.
[* icon_note] Take your time and apply firm, constant force. The display assemblyscreen is a much tighter fit than most devices.
[* black] With a plastic opening tool, begin to gently pry the rear case down, away from the display assemblyscreen, while you pull up with the suction cup.
[* icon_note] Take your time and apply firm, constant force. The display assemblyscreen is a much tighter fit than most devices.
[* black] With a plastic opening tool, begin to gently pry the rear case down, away from the display assemblyscreen, while you pull up with the suction cup.
[* icon_note] There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

在开源创作共享许可协议下,你的投稿已被许可