跳转到主内容

iPhone 5 屏幕更换指南

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的22本指南

英语
中文

正翻译步骤 13

步骤 13
iPhone 5 Screen Replacement, Removing the front panel assembly cable bracket screws: 步骤 0 中的图像 1,1
Removing the front panel assembly cable bracket screws
  • Remove the following screws securing the front panel assembly cable bracket to the logic board:

  • Two 1.2 mm Phillips screws

  • One 1.6 mm Phillips screw

  • This screw tends to not be attracted to a magnetized screwdriver. Take care not to lose it when removing, and make sure it gets back into the right place—a magnetized screw may interfere with the compass.

移除以下螺丝,这些螺丝把前面板组件上的挡板贴片固定到逻辑主板:

两个1.2mm菲利普螺丝

一个1.6mm菲利普螺丝

这个螺丝不能使用有磁力的螺丝刀吸起。在移除的时候请不要弄丢了。确保装回的时候放在正确位置——带磁力的螺丝刀可能会干扰罗盘。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利