翻译步骤＃2 - iMac Intel 20" EMC 2105 and 2118 Front Bezel Replacement - iFixit

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的23指南。

英语

中文

上一步下一步

正翻译步骤 2

步骤 2

Re-orient your iMac so it sits upright on the stand.

Insert a plastic card up into the corner of the air vent slot near the top of the rear case.

Push the card toward the top of the iMac to release the front bezel latch.

Re-orient your iMac so it sits upright on the stand.
Insert a plastic card up into the corner of the air vent slot near the top of the rear case.
Push the card toward the top of the iMac to release the front bezel latch.
Pull the front bezel away from the rear case.
Repeat this process for the other side of the front bezel.
It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches. Or use two cards for the additional thickness.
If the bezel refuses to release, try lifting the lower edge of the front bezel slightly away from the rear case (detailed in the next few steps) and repeat the latch release process.

在开源创作共享许可协议下，你的投稿已被许可。