跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 7

步骤 7
To reinstall the back cover with a custom-cut adhesive strip, follow this guide.
  • To reinstall the back cover with a custom-cut adhesive strip, follow this guide.

  • Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.

  • If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.

如果需要使用客制化胶带重新安装后盖,请参考本教程

在使用新的胶带重新密封手机之前,请确认你已启动手机,测试了相关的维修项目。

如果你愿意,你也可以在不更换胶带的前提下重新安装后盖。除去所有可能影响后盖平整放置的大块胶带。安装后盖之后,加热后盖并施加压力以保证固定。这么做不会让你的手机防水,但是通常情况下,胶带已经足够坚固。

在开源创作共享许可协议下,你的投稿已被许可