跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 1

步骤 1
Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.
  • Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.

  • Apply a heated iOpener to a long edge of the phone for about two minutes.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage.

拆开你的手机将会损坏手机的防水胶。在你继续之前,准备好用于更换的粘合剂,或者如果你重新组装时不更换粘合剂的话,请防止任何液体接触你的手机。

拿一个加热后的iOpener放在手机的背面,放置大约两分钟。

你也许需要用iOpener重复这个步骤多次来保证手机足够热。遵循iOpener的说明来避免过度的加热。

吹风机、热风枪或加热板也可以使用,但要注意不要让手机过热——OLED屏幕和内部电池都容易受到热损伤。

在开源创作共享许可协议下,你的投稿已被许可