跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 1

步骤 1
Note where the clips are located, those will be where you start, they are noted by the red arrows in the picture With a pry tool go in at a 90 degree angle straight into the 9 clip locations and begin detaching them from the board Be careful while detaching to not lift the keyboard too high or be to rough on it as the keys can break fairly easily and there is a fragile ribbon cable beneath the keyboard connected to the laptop
  • Note where the clips are located, those will be where you start, they are noted by the red arrows in the picture

  • With a pry tool go in at a 90 degree angle straight into the 9 clip locations and begin detaching them from the board

  • Be careful while detaching to not lift the keyboard too high or be to rough on it as the keys can break fairly easily and there is a fragile ribbon cable beneath the keyboard connected to the laptop

  • Carefully disconnect the ribbon cable at its source

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可