修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的11本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 4

步骤 4
Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board. To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery. Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

  • Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.

  • Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

  • Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.

移除那一颗用来固定电池到主板的飞利浦#000 2.3毫米的螺丝钉。

为了防止短路，你可以用一个撬板来断开电池

将电池断开撬板滑入主板电池连接器下方,并将它放到适当的地方。

[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
[* icon_caution] Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.
[* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.

在开源创作共享许可协议下，你的投稿已被许可。