跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Remove the following screws from the metal bracket between the rear facing flash and camera windows: One 2.9 mm standoff screw
  • Remove the following screws from the metal bracket between the rear facing flash and camera windows:

  • One 2.9 mm standoff screw

  • Standoff screws are best removed with a standoff screwdriver or standoff driver bit. A small flathead screwdriver can also do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

  • One 1.6 mm Phillips screw

  • One 1.9 mm Phillips screw

移除后置摄像头窗口以及闪光灯之间的支架上的螺丝

一颗 2.9 mm 压铆螺柱螺丝

移除压铆螺柱螺丝最好使用iPhone专用压铆螺柱螺丝刀压铆螺柱螺丝刀替换头。你也可以使用一把小的一字形螺丝刀,但要注意不要损伤周围元件。

一颗1.6 mm 十字螺丝

一颗1.9 mm 十字螺丝

在开源创作共享许可协议下,你的投稿已被许可