跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 1

步骤 1
Remove the following screws securing the Lightning connector assembly to the rear case:
  • Remove the following screws securing the Lightning connector assembly to the rear case:

  • One 2.9 mm Phillips screw

  • During re-installation, make sure that the headphone jack's plastic protrusion lies above the metal washer.

  • One 1.5 mm Phillips screw

  • Two 3.3 mm Phillips screws

从充电口排线上轻轻拉起话筒排线。

如果你想换个新的充电口排线,需要拆下扬声器周围的胶圈。你可以用撬棒拆除。

[* black] Gently peelRemove the speaker assembly away fromfollowing screws securing the Lightning connector ribbon cable.
[* icon_note] If you are replacing
assembly to the Lightning connector with a new partrear case:
[* red] One 2.9 mm Phillips screw
[* icon_reminder] During re-installation
, make sure to transferthat the rubber casing aroundheadphone jack's plastic protrusion lies above the microphone. You can do this using a spudger.metal washer.
[* orange] One 1.5 mm Phillips screw
[* yellow] Two 3.3 mm Phillips screws
[* black] Gently peelRemove the speaker assembly away fromfollowing screws securing the Lightning connector ribbon cable.
[* icon_note] If you are replacing
assembly to the Lightning connector with a new partrear case:
[* red] One 2.9 mm Phillips screw
[* icon_reminder] During re-installation
, make sure to transferthat the rubber casing aroundheadphone jack's plastic protrusion lies above the microphone. You can do this using a spudger.metal washer.
[* orange] One 1.5 mm Phillips screw
[* yellow] Two 3.3 mm Phillips screws

在开源创作共享许可协议下,你的投稿已被许可