修复你的物品

维修的权力

商店

返回指南
英语
中文
上一步 下一步

正翻译步骤 2

步骤 2
Use the opening tool to pry up and disconnect the Lightning connector cable connector from its socket on the logic board. Use the opening tool to pry up and disconnect the Lightning connector cable connector from its socket on the logic board.

  • Use the opening tool to pry up and disconnect the Lightning connector cable connector from its socket on the logic board.

小心拉起移除耳机孔旁边的接地排线。

注意不要弄丢在听筒排线和充电口排线间的塑料垫圈。当重新安装听筒排线时需要正确的装回塑料垫圈。

[* black] Carefully peel off and remove the grounding cable from the edge ofUse the headphone jack.
[* black] Take care notopening tool to losepry up and disconnect the plastic gasket between the headphoneLightning connector andcable connector from its socket on the outer shell. While aligning the headphone connector, make sure to align this gasket correctlylogic board.
[* black] Carefully peel off and remove the grounding cable from the edge ofUse the headphone jack.
[* black] Take care notopening tool to losepry up and disconnect the plastic gasket between the headphoneLightning connector andcable connector from its socket on the outer shell. While aligning the headphone connector, make sure to align this gasket correctlylogic board.

在开源创作共享许可协议下，你的投稿已被许可。