Skip to main content

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 4

Step 4
Remove the rear-facing camera from the logic board. Your replacement part may not come with the flash surround—if not, remove it from the old camera and transfer it to your replacement.
  • Remove the rear-facing camera from the logic board.

  • Your replacement part may not come with the flash surround—if not, remove it from the old camera and transfer it to your replacement.

在逻辑板上去除后置摄像头。

您的更换部分可能不带闪光灯,如果没有,从旧摄像头上拆下,并将其转移到您的新摄像头上。

在开源创作共享许可协议下,你的投稿已被许可