跳转到主内容

iPad 6 Wi-Fi LCD austauschen

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
德语

正翻译步骤 4

步骤 4
iPad 6 Wi-Fi LCD Replacement, Battery connector information: 步骤 0 中的图像 1,3 iPad 6 Wi-Fi LCD Replacement, Battery connector information: 步骤 0 中的图像 2,3 iPad 6 Wi-Fi LCD Replacement, Battery connector information: 步骤 0 中的图像 3,3
Battery connector information
  • These photos show what the battery connector looks like underneath the logic board. Use these photos as a reference while you safely disconnect the battery.

  • Notice that the battery connector has cantilever springs on the logic board that press against the battery contact pads. Since both the logic board and battery are glued down, you'll need to slide something thin and flexible between the contact points to disconnect the battery.

Diese Fotos zeigen, wie der Akkuanschluss unter dem Logic Board aussieht. Verwende diese Fotos als Referenz, um den Akku sicher abzuklemmen.

Beachte, dass der Akkustecker freitragende Federn auf dem Logic Board hat, die gegen die Kontaktflächen des Akkus drücken. Da sowohl das Logic Board als auch der Akku festgeklebt sind, musst du etwas Dünnes und Flexibles zwischen die Kontaktpunkte schieben um den Akku abzutrennen.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利