跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
中文

正翻译步骤 3

步骤 3
Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end. Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers. There may be glue around the screw holes that needs to be cut with a knife. Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.
  • Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers. There may be glue around the screw holes that needs to be cut with a knife.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

  • Be gentle and keep an eye on the LCD cables as you flip the display over.

  • Lay the LCD on its face to allow access to the display cables.

  • Set the LCD down on a soft, clean, lint-free surface.

可不要想着完全移除LCD面板哦!许许多多的线缆以及home键仍把它紧紧地连在iPad上。仅仅抬起前置摄像头的那一侧面板。

用撬棒平的那一面将LCD面板从槽中撬开,知道你能用手指捏住它

像翻书一样翻开LCD面板,抬起靠近摄像头的那一侧并把它盖过home键的那一侧

轻轻地!当你翻开面板时注意那些线缆

将LCD面板反放在桌上从而使你够到那些线缆

一定要把面板放到一个柔软干净平整的表面

[* icon_caution] Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
[* black] Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers. There may be glue around the screw holes that needs to be cut with a knife.
[* black] Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers. There may be glue around the screw holes that needs to be cut with a knife.
[* black] Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.
[* icon_caution] Be gentle and keep an eye on the LCD cables as you flip the display over.
[* black] Lay the LCD on its face to allow access to the display cables.
[* icon_note] Set the LCD down on a soft, clean, lint-free surface.

在开源创作共享许可协议下,你的投稿已被许可