iPad 6 Wi-Fi LCD Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南。

英语

荷兰语

上一步下一步

正翻译步骤 3

步骤 3

iPad 6 Wi-Fi LCD Replacement: 步骤 0 中的图像 1，3

iPad 6 Wi-Fi LCD Replacement: 步骤 0 中的图像 2，3

iPad 6 Wi-Fi LCD Replacement: 步骤 0 中的图像 3，3

Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers. There may be glue around the screw holes that needs to be cut with a knife.
Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.
Be gentle and keep an eye on the LCD cables as you flip the display over.
Lay the LCD on its face to allow access to the display cables.
Set the LCD down on a soft, clean, lint-free surface.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。