跳转到主内容
英语
中文

正翻译步骤 10

步骤 10
With the screws removed you can now separate the gearbox from the receiver. Start by prying the front section off a little bit. Then slide the gearbox slightly forward and down.
  • With the screws removed you can now separate the gearbox from the receiver.

  • Start by prying the front section off a little bit. Then slide the gearbox slightly forward and down.

  • You might have adjust the selector as you go if it is being stubborn.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可