跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
Now that you have removed the flash assembly, it is time to remove the motherboard. First, the three remaining ribbon connectors should be gently disconnected.  They are both located on the upper right side of the motherboard.
  • Now that you have removed the flash assembly, it is time to remove the motherboard.

  • First, the three remaining ribbon connectors should be gently disconnected. They are both located on the upper right side of the motherboard.

  • The foam on second ribbon connector must be pulled back to remove it. Do this gently as to not damage the connector or the foam. There is a small switch under the foam that must be flipped up before the connector can be removed.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可