跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 8

步骤 8
To remove the Ribbon connectors that have a locking mechanism, identify the flap on the ribbon connector. Use either needle nose tweezers, or a plastic wedge to flip the small flap to the "up" position. Once the flap is up, use the plastic spudger to pull the ribbon connector out of the connection using the hole in the center of the ribbon. Now is a good time to remove the small backup battery from the motherboard.
  • To remove the Ribbon connectors that have a locking mechanism, identify the flap on the ribbon connector. Use either needle nose tweezers, or a plastic wedge to flip the small flap to the "up" position.

  • Once the flap is up, use the plastic spudger to pull the ribbon connector out of the connection using the hole in the center of the ribbon.

  • Now is a good time to remove the small backup battery from the motherboard.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可