跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Locate the two small oval depressions in the keyboard fascia, just below either Ctrl key. Using a flat screwdriver or narrow spudger in the depressions, slide the fascia up towards the hinges about 3mm (0.1 inches). The top edge slips beneath the bezel. This exposes six Phillips screw heads, located in the 3rd and 5th rows of the key area. Loosen them.
Expose and loosen the screws
  • Locate the two small oval depressions in the keyboard fascia, just below either Ctrl key.

  • Using a flat screwdriver or narrow spudger in the depressions, slide the fascia up towards the hinges about 3mm (0.1 inches). The top edge slips beneath the bezel.

  • This exposes six Phillips screw heads, located in the 3rd and 5th rows of the key area. Loosen them.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可