跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 1

步骤 1
Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.
  • Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.

  • Heat an iOpener and apply it to a long edge of the phone for about two minutes.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage.

拆开你的手机会破坏防水密封。在你拆解之前准备好替代的防水胶;或者不粘替代的防水胶,并且在重装后的使用过程中小心避免沾上液体。

加热一个iOpener并且把它放在手机长边上约2分钟。

你可能需要重新加热并且重新放置iOpener几次来让手机足够热。遵照iOpener的指南来避免过热。

吹风机、加热枪或加热盘也可以使用,但是要小心,注意避免手机过热——OLED屏和手机电池都容易因为过热而受损。

在开源创作共享许可协议下,你的投稿已被许可