iPhone 5 更换电池

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南。

英语

中文

上一步

正翻译步骤 3

步骤 3

Removing the battery

Remove the battery.
If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the the ribbon cable.
Before you adhere the replacement battery, temporarily reconnect the battery connector to the motherboard socket. This ensures that the battery is properly aligned in its recess.
Adhere the battery, disconnect it, and continue reassembling your device.
During reassembly, make sure the battery is seated firmly against the rear case. This will prevent any damage to other components when reinstalling the front panel assembly.
Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

移除电池

移除电池。
如果你的更换电池上有一层塑料纸，请在安装之前移除。
在重新组装手机时，确保电池被牢靠地固定在机身后盖上。这是为了防止在装回显示屏组件时造成其他部分的损坏。
重新组装好手机之后，进行一次强制重启。这可以很简单地避免诸多可能的故障。

	[title] Removing the battery
	[* black] Remove the battery.
	[* icon_note] If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the the ribbon cable.
+	[* icon_reminder] Before you adhere the replacement battery, temporarily reconnect the battery connector to the motherboard socket. This ensures that the battery is properly aligned in its recess.
+	[* black] Adhere the battery, disconnect it, and continue reassembling your device.
	[* icon_caution] During reassembly, make sure the battery is seated firmly against the rear case. This will prevent any damage to other components when reinstalling the front panel assembly.
	[* icon_reminder] Perform a [guide\|44495\|hard reset\|new_window=true] after reassembly. This can prevent several issues and simplify troubleshooting.