跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的22本指南

英语
中文

正翻译步骤 9

Step 9
Do not try to completely remove the front panel assembly from the rear case, as there are several ribbon cables still attached at the top of the iPhone. Once the clips have been released on the bottom and sides of the front panel assembly, pull the bottom of the assembly away from the rear case. Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone.
Opening up the phone
  • Do not try to completely remove the front panel assembly from the rear case, as there are several ribbon cables still attached at the top of the iPhone.

  • Once the clips have been released on the bottom and sides of the front panel assembly, pull the bottom of the assembly away from the rear case.

  • Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone.

  • Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.

不要尝试把屏幕完全从机身分离,因为这个时候还有一些带状电线连接着屏幕和机身。

请务必在维修继续前断开电池,如果不这样做的话,有时会导致手机运行太热和/或与触摸敏感问题。

当前面板组件底部和侧面夹扣被撬起后,拉动组件的底部使之远离后壳。

缓慢提升前面板组件跟后壳体成约90度。

在开源创作共享许可协议下,你的投稿已被许可