iPhone 5 更换电池

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

Lifting the battery

Use the exposed clear plastic pull tab to peel the battery off the adhesive securing it to the iPhone.
If you are having trouble peeling the battery up or if the tab breaks, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery.
Wait about one minute for the alcohol solution to weaken the adhesive. Use an opening tool to gently lift the battery by its edge.
Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.
If you still have trouble peeling the battery up, use an iOpener or hair dryer to heat the rear case of the iPhone and soften the adhesive.
Overheating the iPhone may ignite the battery.

	[title] Lifting the battery
	[* black] Use the exposed clear plastic pull tab to peel the battery off the adhesive securing it to the iPhone.
-	[* black] If you have trouble peeling the battery up, use an iOpener or hair dryer to heat the rear case of the iPhone and soften the adhesive.
-	[* black] The plastic tab is fragile and may break. If your tab breaks before the battery is freed, refer to the following steps.
+	[* icon_note] If you are having trouble peeling the battery up or if the tab breaks, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery.
+	[* black] Wait about one minute for the alcohol solution to weaken the adhesive. Use an opening tool to gently lift the battery by its edge.
+	[* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
+	[* icon_reminder] If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.
+	[* icon_note] If you still have trouble peeling the battery up, use an iOpener or hair dryer to heat the rear case of the iPhone and soften the adhesive.
+	[* icon_caution] Overheating the iPhone may ignite the battery.