修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 4

步骤 4
Slide the opening pick up along the side of the phone, separating the adhesive. Go slowly so that the tip doesn't slip out of the seam. If sliding becomes difficult, reheat and reapply the iOpener.

  • Slide the opening pick up along the side of the phone, separating the adhesive.

  • Go slowly so that the tip doesn't slip out of the seam. If sliding becomes difficult, reheat and reapply the iOpener.

  • Leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.

沿着开口滑动撬片，打开防水胶。

动作慢一些这样撬棒的尖端才不会滑出缝隙。如果滑动困难，重新加热并放置iOpener。

把撬片留在缝隙里然后取第二个撬片来进行下一步。把撬片留在里面可以防止胶重新粘在一起。

在开源创作共享许可协议下，你的投稿已被许可。