跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 16

步骤 16
Remove the display. Follow this link for a detailed screen adhesive application guide.
  • Remove the display.

  • Follow this link for a detailed screen adhesive application guide.

  • Before installing a new display, it's very important to remove all traces of the old adhesive from the frame, while taking special care to remove any small glass fragments.

  • After removing all traces of glue and glass from the frame, clean the adhesion areas with 90% (or higher) isopropyl alcohol and a lint-free cloth or coffee filter. Swipe in one direction only, not back and forth.

  • This helps remove any remaining adhesive residue and preps the surface for the new adhesive.

  • If the frame is bent, or if any glue or glass remnants are left behind, the new display will not mount correctly and may be damaged. If necessary, replace the frame.

  • The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

移除屏幕

在安装新的屏幕前,从框架上清除掉所有的旧粘合剂非常重要,同时要特别小心地去除任何小玻璃碎片。

从框架上清除所有胶水和玻璃痕迹后,用90%(或更高浓度的)异丙醇和无绒布或咖啡过滤器清洁粘合区域。 仅向一个方向擦拭,而不是来回擦拭。

这有助于去除任何残留的粘合剂残留物并为新粘合剂准备表面。

如果框架弯曲,或者留下任何胶水或玻璃残留物,则新屏幕将无法正确安装并可能损坏。 如有必要,请更换框架。

确保新屏幕安全的最佳方法是使用一张定制的双面胶带。 将胶带贴在屏幕背面,然后小心地将显示屏电缆穿过框架。 对齐屏幕并将其安装到位。

[* black] Remove the display.
+[* icon_note] [guide|122831|Follow this link|new_window=true] for a detailed screen adhesive application guide.
[* icon_caution] Before installing a new display, it's very important to remove all traces of the old adhesive from the frame, while taking special care to remove any small glass fragments.
[* black] After removing all traces of glue and glass from the frame, clean the adhesion areas with 90% (or higher) isopropyl alcohol and a lint-free cloth or coffee filter. Swipe in one direction only, not back and forth.
[* icon_note] This helps remove any remaining adhesive residue and preps the surface for the new adhesive.
[* icon_caution] If the frame is bent, or if any glue or glass remnants are left behind, the new display will not mount correctly and may be damaged. If necessary, [guide|108056|replace the frame|new_window=true].
[* icon_reminder] The best way to secure the new screen is with a [guide|113604|sheet of custom-cut double-sided tape|new_window=true]. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

在开源创作共享许可协议下,你的投稿已被许可