跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the eleven 3.7 mm Phillips screws securing the wireless charging coil + antenna assembly. If any screws are difficult to remove even when fully loosened, you can pull them out with tweezers.
  • Remove the eleven 3.7 mm Phillips screws securing the wireless charging coil + antenna assembly.

  • If any screws are difficult to remove even when fully loosened, you can pull them out with tweezers.

移除固定无线充电+nfc模组的11个3.7毫米十字螺丝

如果有哪个螺丝在完全拧松后还是很难卸下,用镊子拉出来。

在开源创作共享许可协议下,你的投稿已被许可