修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 10

步骤 10
During reassembly, in order to reconnect the fingerprint sensor cable, first angle the back cover into position until the cable connector lines up perfectly over its socket. Then, use the flat end of your spudger to gently snap the connector into place by pressing it straight down. If you have slender hands, you may be able to press the connector into place with your finger. Just be careful not to strain the cable.

  • During reassembly, in order to reconnect the fingerprint sensor cable, first angle the back cover into position until the cable connector lines up perfectly over its socket.

  • Then, use the flat end of your spudger to gently snap the connector into place by pressing it straight down.

  • If you have slender hands, you may be able to press the connector into place with your finger. Just be careful not to strain the cable.

  • This takes patience and a bit of practice. Don't rush it or attempt to force the connector into place.

在重新组装的过程中，为了能连接指纹传感器，首先将背板调整至能让传感器排线完美够得到接口的姿态。

接着，使用撬棒平头一端缓缓按下连接器。

如果你的手足够苗条，你或许能够用手指固定连接器。小心不要用力拉扯排线。

这一步需要一些耐心和技巧，不要着急或者试图用力让连接器归位。

在开源创作共享许可协议下，你的投稿已被许可。