修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 2

步骤 2
In the following steps, you'll be cutting through the adhesive securing the back cover. The adhesive is laid out as seen in the first image, which shows the inside of the cover after it has been removed.

  • In the following steps, you'll be cutting through the adhesive securing the back cover.

  • The adhesive is laid out as seen in the first image, which shows the inside of the cover after it has been removed.

  • As seen from outside the phone, you'll be slicing through the adhesive in the areas shown:

  • Thick portions of adhesive

  • Thin areas of adhesive

  • Avoid prying or slicing in this area, to protect the fingerprint sensor flex cable.

在这一步中，你将要切开固定背板的胶条。

第一张图片已被拿下的背板，显示背板了胶条的分布。

如果从手机外部看去，胶条分布如图所示：

胶条很厚的地方

胶条很薄的地方

注意避开此区域，其下有指纹传感器连接线。

在开源创作共享许可协议下，你的投稿已被许可。