跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 1

步骤 1
Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.
  • Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.

  • Prepare an iOpener and heat the back of the phone along its left edge for about two minutes. This will help soften the adhesive securing the back cover.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage.

打开你的手机将会破坏防水性能。在开始前准备好替换的防水胶条。如果不替换防水胶条的话请避免手机暴露在水里。

准备好你的iOpener 并沿着设备的左侧边缘加热两分钟。这一步的目的是软化固定背板的胶条。

你可能需要加热iOpener并多次加热设备直到她足够热。请遵循iOpener的说明以避免过热。

你也可以使用热风枪、吹风机或者加热盘来加热你的设备,但是谨防设备过热——OLED显示屏和内置电池都会因为过热损坏。

在开源创作共享许可协议下,你的投稿已被许可