Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 10

Step 10
Disconnect the right fan by pulling its connector away from the socket on the logic board.
  • Disconnect the right fan by pulling its connector away from the socket on the logic board.

  • When pulling this connector away from its socket, it is helpful to use your fingernails to pull on the ears at each side of the connector.

  • Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可